目前共有5篇帖子。 字體大小:較小 - 100% (默認)▼  內容轉換:不轉換▼
 
點擊 回復
27 4
Your Perl installation is not complete enough; at least the following
一派掌門 二十級
1樓 發表于:2025-3-11 14:13

make[2]: Entering directory '/home/oct1158/Documents/Code/C/luckfox-pico/sysdrv/source/buildroot/buildroot-2023.02.6'
make[2]: Leaving directory '/home/oct1158/Documents/Code/C/luckfox-pico/sysdrv/source/buildroot/buildroot-2023.02.6'
Your Perl installation is not complete enough; at least the following
modules are missing:

         English
         ExtUtils::MakeMaker
         Thread::Queue
         FindBin

make[1]: *** [support/dependencies/dependencies.mk:27: dependencies] Error 1
make[1]: Leaving directory '/home/oct1158/Documents/Code/C/luckfox-pico/sysdrv/source/buildroot/buildroot-2023.02.6'
make: *** [Makefile:617: buildroot] Error 2
make: Leaving directory '/home/oct1158/Documents/Code/C/luckfox-pico/sysdrv'
[build.sh:error] Running build_rootfs failed!
[build.sh:error] exit code 2 from line 852:
[build.sh:info]     make rootfs -C ${SDK_SYSDRV_DIR}
[oct1158@fed41-bh8f7e0 luckfox-pico]$

一派掌門 二十級
2樓 發表于:2025-3-11 14:18

解决方法:通过dnf安装。

[oct1158@fed41-bh8f7e0 luckfox-pico]$ sudo dnf install perl-English
Updating and loading repositories:
Repositories loaded.
Package                  Arch    Version                  Repository        Size
Installing:
 perl-English            noarch  1.11-514.fc41            updates        6.2 KiB

Transaction Summary:
 Installing:         1 package

Total size of inbound packages is 13 KiB. Need to download 13 KiB.
After this operation, 6 KiB extra will be used (install 6 KiB, remove 0 B).
Is this ok [y/N]: y
[1/1] perl-English-0:1.11-514.fc41.noar 100% | 137.3 KiB/s |  13.5 KiB |  00m00s
--------------------------------------------------------------------------------
[1/1] Total                             100% |  31.9 KiB/s |  13.5 KiB |  00m00s
Running transaction
[1/3] Verify package files              100% |   1.0 KiB/s |   1.0   B |  00m00s
[2/3] Prepare transaction               100% |   3.0   B/s |   1.0   B |  00m00s
[3/3] Installing perl-English-0:1.11-51 100% |  13.9 KiB/s |   6.6 KiB |  00m00s
Complete!
[oct1158@fed41-bh8f7e0 luckfox-pico]$

 

 
一派掌門 二十級
3樓 發表于:2025-3-11 14:18

[oct1158@fed41-bh8f7e0 luckfox-pico]$ sudo dnf install perl-ExtUtils-MakeMaker
Updating and loading repositories:
Repositories loaded.
Package                            Arch   Version                 Reposit      Size
Installing:
 perl-ExtUtils-MakeMaker           noarch 2:7.70-512.fc41         fedora  734.1 KiB
Installing dependencies:
 add-determinism                   x86_64 0.3.6-3.fc41            updates   2.4 MiB
 annobin-docs                      noarch 12.69-1.fc41            fedora   97.7 KiB
 annobin-plugin-gcc                x86_64 12.69-1.fc41            fedora  985.0 KiB
 ansible-srpm-macros               noarch 1-16.fc41               fedora   35.7 KiB
 build-reproducibility-srpm-macros noarch 0.3.6-3.fc41            updates 735.0   B
 dwz                               x86_64 0.15-8.fc41             fedora  298.9 KiB
 efi-srpm-macros                   noarch 5-13.fc41               updates  40.2 KiB
 fonts-srpm-macros                 noarch 1:2.0.5-17.fc41         fedora   55.8 KiB
 forge-srpm-macros                 noarch 0.4.0-1.fc41            updates  38.9 KiB
 fpc-srpm-macros                   noarch 1.3-13.fc41             fedora  144.0   B
 gcc-plugin-annobin                x86_64 14.2.1-7.fc41           updates  59.6 KiB
 ghc-srpm-macros                   noarch 1.9.1-2.fc41            fedora  747.0   B
 gnat-srpm-macros                  noarch 6-6.fc41                fedora    1.0 KiB
 go-srpm-macros                    noarch 3.6.0-5.fc41            updates  60.8 KiB
 kernel-srpm-macros                noarch 1.0-24.fc41             fedora    1.9 KiB
 lua-srpm-macros                   noarch 1-14.fc41               fedora    1.3 KiB
 ocaml-srpm-macros                 noarch 10-3.fc41               fedora    1.9 KiB
 openblas-srpm-macros              noarch 2-18.fc41               fedora  112.0   B
 package-notes-srpm-macros         noarch 0.5-12.fc41             fedora    1.6 KiB
 perl-AutoSplit                    noarch 5.74-514.fc41           updates  23.1 KiB
 perl-Benchmark                    noarch 1.25-514.fc41           updates  36.3 KiB
 perl-CPAN-Meta-Requirements       noarch 2.143-9.fc41            fedora   81.2 KiB
 perl-CPAN-Meta-YAML               noarch 0.018-512.fc41          fedora   50.3 KiB
 perl-Devel-PPPort                 x86_64 3.72-512.fc41           fedora  892.3 KiB
 perl-ExtUtils-Command             noarch 2:7.70-512.fc41         fedora    9.6 KiB
 perl-ExtUtils-Constant            noarch 0.25-514.fc41           updates  85.8 KiB
 perl-ExtUtils-Install             noarch 2.22-511.fc41           fedora   85.5 KiB
 perl-ExtUtils-Manifest            noarch 1:1.75-511.fc41         fedora   84.8 KiB
 perl-ExtUtils-ParseXS             noarch 1:3.51-511.fc41         fedora  399.7 KiB
 perl-File-Compare                 noarch 1.100.800-514.fc41      updates   5.6 KiB
 perl-File-Copy                    noarch 2.41-514.fc41           updates  19.6 KiB
 perl-I18N-Langinfo                x86_64 0.24-514.fc41           updates  38.8 KiB
 perl-JSON-PP                      noarch 1:4.16-512.fc41         fedora  141.8 KiB
 perl-Math-BigInt                  noarch 1:2.0030.03-3.fc41      fedora  957.7 KiB
 perl-Math-Complex                 noarch 1.62-514.fc41           updates  85.0 KiB
 perl-Test-Harness                 noarch 1:3.50-1.fc41           fedora  559.6 KiB
 perl-srpm-macros                  noarch 1-56.fc41               fedora  861.0   B
 perl-version                      x86_64 9:0.99.33-1.fc41        fedora  132.8 KiB
 pyproject-srpm-macros             noarch 1.17.0-1.fc41           updates   1.9 KiB
 python-srpm-macros                noarch 3.13-3.fc41             fedora   51.0 KiB
 python3-pyparsing                 noarch 3.1.2-7.fc41            fedora    1.0 MiB
 qt5-srpm-macros                   noarch 5.15.15-1.fc41          fedora  500.0   B
 qt6-srpm-macros                   noarch 6.8.2-1.fc41            updates 456.0   B
 redhat-rpm-config                 noarch 293-1.fc41              fedora  183.5 KiB
 rust-srpm-macros                  noarch 26.3-3.fc41             fedora    4.8 KiB
 systemtap-sdt-devel               x86_64 5.2-1.fc41              updates 182.4 KiB
 systemtap-sdt-dtrace              x86_64 5.2-1.fc41              updates 179.0 KiB
 zig-srpm-macros                   noarch 1-3.fc41                fedora    1.1 KiB
Installing weak dependencies:
 perl-CPAN-Meta                    noarch 2.150010-511.fc41       fedora  592.2 KiB
 perl-Encode-Locale                noarch 1.05-30.fc41            fedora   19.0 KiB
 perl-Time-HiRes                   x86_64 4:1.9777-511.fc41       fedora  119.9 KiB
 perl-devel                        x86_64 4:5.40.1-514.fc41       updates   8.0 MiB
 perl-doc                          noarch 5.40.1-514.fc41         updates  11.0 MiB

Transaction Summary:
 Installing:        54 packages

Total size of inbound packages is 10 MiB. Need to download 10 MiB.
After this operation, 30 MiB extra will be used (install 30 MiB, remove 0 B).
Is this ok [y/N]: y
[ 1/54] perl-ExtUtils-Command-2:7.70-51 100% |  59.9 KiB/s |  14.1 KiB |  00m00s
[ 2/54] perl-ExtUtils-Install-0:2.22-51 100% | 103.8 KiB/s |  43.6 KiB |  00m00s
[ 3/54] perl-ExtUtils-MakeMaker-2:7.70- 100% | 581.2 KiB/s | 292.9 KiB |  00m01s
[ 4/54] perl-ExtUtils-Manifest-1:1.75-5 100% | 126.7 KiB/s |  34.1 KiB |  00m00s
[ 5/54] perl-ExtUtils-ParseXS-1:3.51-51 100% |   1.5 MiB/s | 187.3 KiB |  00m00s
[ 6/54] perl-version-9:0.99.33-1.fc41.x 100% |   1.0 MiB/s |  63.0 KiB |  00m00s
[ 7/54] perl-File-Copy-0:2.41-514.fc41. 100% | 139.8 KiB/s |  20.0 KiB |  00m00s
[ 8/54] perl-Test-Harness-1:3.50-1.fc41 100% |   1.2 MiB/s | 277.0 KiB |  00m00s
[ 9/54] perl-Benchmark-0:1.25-514.fc41. 100% |  78.5 KiB/s |  26.6 KiB |  00m00s
[10/54] perl-Time-HiRes-4:1.9777-511.fc 100% | 708.0 KiB/s |  57.3 KiB |  00m00s
[11/54] perl-Encode-Locale-0:1.05-30.fc 100% | 564.2 KiB/s |  18.6 KiB |  00m00s
[12/54] perl-File-Compare-0:1.100.800-5 100% |  46.5 KiB/s |  13.1 KiB |  00m00s
[13/54] perl-AutoSplit-0:5.74-514.fc41. 100% |  68.0 KiB/s |  21.5 KiB |  00m00s
[14/54] redhat-rpm-config-0:293-1.fc41. 100% | 837.2 KiB/s |  82.0 KiB |  00m00s
[15/54] gcc-plugin-annobin-0:14.2.1-7.f 100% | 580.1 KiB/s |  58.0 KiB |  00m00s
[16/54] annobin-plugin-gcc-0:12.69-1.fc 100% |   4.5 MiB/s | 971.0 KiB |  00m00s
[17/54] ansible-srpm-macros-0:1-16.fc41 100% | 247.3 KiB/s |  20.8 KiB |  00m00s
[18/54] perl-Devel-PPPort-0:3.72-512.fc 100% | 403.3 KiB/s | 219.0 KiB |  00m01s
[19/54] dwz-0:0.15-8.fc41.x86_64        100% |   2.5 MiB/s | 138.9 KiB |  00m00s
[20/54] fonts-srpm-macros-1:2.0.5-17.fc 100% | 464.9 KiB/s |  27.0 KiB |  00m00s
[21/54] fpc-srpm-macros-0:1.3-13.fc41.n 100% | 137.3 KiB/s |   8.0 KiB |  00m00s
[22/54] ghc-srpm-macros-0:1.9.1-2.fc41. 100% | 170.9 KiB/s |   9.1 KiB |  00m00s
[23/54] perl-devel-4:5.40.1-514.fc41.x8 100% |   1.0 MiB/s | 764.2 KiB |  00m01s
[24/54] gnat-srpm-macros-0:6-6.fc41.noa 100% |  72.8 KiB/s |   9.0 KiB |  00m00s
[25/54] kernel-srpm-macros-0:1.0-24.fc4 100% |  96.7 KiB/s |   9.9 KiB |  00m00s
[26/54] lua-srpm-macros-0:1-14.fc41.noa 100% | 185.0 KiB/s |   8.9 KiB |  00m00s
[27/54] ocaml-srpm-macros-0:10-3.fc41.n 100% | 224.4 KiB/s |   9.2 KiB |  00m00s
[28/54] openblas-srpm-macros-0:2-18.fc4 100% | 160.7 KiB/s |   7.7 KiB |  00m00s
[29/54] package-notes-srpm-macros-0:0.5 100% | 234.0 KiB/s |   9.8 KiB |  00m00s
[30/54] perl-srpm-macros-0:1-56.fc41.no 100% | 181.1 KiB/s |   8.5 KiB |  00m00s
[31/54] python-srpm-macros-0:3.13-3.fc4 100% | 275.8 KiB/s |  23.7 KiB |  00m00s
[32/54] qt5-srpm-macros-0:5.15.15-1.fc4 100% |  93.7 KiB/s |   8.9 KiB |  00m00s
[33/54] rust-srpm-macros-0:26.3-3.fc41. 100% | 155.2 KiB/s |  12.1 KiB |  00m00s
[34/54] zig-srpm-macros-0:1-3.fc41.noar 100% | 270.8 KiB/s |   8.1 KiB |  00m00s
[35/54] annobin-docs-0:12.69-1.fc41.noa 100% |   1.6 MiB/s |  91.8 KiB |  00m00s
[36/54] perl-CPAN-Meta-0:2.150010-511.f 100% |   1.7 MiB/s | 190.9 KiB |  00m00s
[37/54] perl-CPAN-Meta-Requirements-0:2 100% | 292.5 KiB/s |  35.1 KiB |  00m00s
[38/54] perl-CPAN-Meta-YAML-0:0.018-512 100% | 200.7 KiB/s |  26.1 KiB |  00m00s
[39/54] perl-JSON-PP-1:4.16-512.fc41.no 100% | 629.8 KiB/s |  66.1 KiB |  00m00s
[40/54] perl-Math-BigInt-1:2.0030.03-3. 100% |   2.0 MiB/s | 225.7 KiB |  00m00s
[41/54] build-reproducibility-srpm-macr 100% | 208.2 KiB/s |  10.8 KiB |  00m00s
[42/54] efi-srpm-macros-0:5-13.fc41.noa 100% | 415.9 KiB/s |  22.5 KiB |  00m00s
[43/54] forge-srpm-macros-0:0.4.0-1.fc4 100% | 312.8 KiB/s |  19.7 KiB |  00m00s
[44/54] go-srpm-macros-0:3.6.0-5.fc41.n 100% | 499.3 KiB/s |  28.0 KiB |  00m00s
[45/54] pyproject-srpm-macros-0:1.17.0- 100% | 241.0 KiB/s |  14.0 KiB |  00m00s
[46/54] qt6-srpm-macros-0:6.8.2-1.fc41. 100% | 173.5 KiB/s |   9.2 KiB |  00m00s
[47/54] perl-Math-Complex-0:1.62-514.fc 100% | 499.2 KiB/s |  45.9 KiB |  00m00s
[48/54] perl-I18N-Langinfo-0:0.24-514.f 100% | 466.0 KiB/s |  25.6 KiB |  00m00s
[49/54] add-determinism-0:0.3.6-3.fc41. 100% |   3.2 MiB/s | 875.9 KiB |  00m00s
[50/54] perl-ExtUtils-Constant-0:0.25-5 100% | 272.3 KiB/s |  43.6 KiB |  00m00s
[51/54] python3-pyparsing-0:3.1.2-7.fc4 100% |   2.7 MiB/s | 277.4 KiB |  00m00s
[52/54] systemtap-sdt-dtrace-0:5.2-1.fc 100% | 184.2 KiB/s |  68.1 KiB |  00m00s
[53/54] systemtap-sdt-devel-0:5.2-1.fc4 100% | 172.3 KiB/s |  67.5 KiB |  00m00s
[54/54] perl-doc-0:5.40.1-514.fc41.noar 100% |   5.1 MiB/s |   4.9 MiB |  00m01s
--------------------------------------------------------------------------------
[54/54] Total                           100% |   2.0 MiB/s |  10.4 MiB |  00m05s
Running transaction
[ 1/56] Verify package files            100% |   1.8 KiB/s |  54.0   B |  00m00s
[ 2/56] Prepare transaction             100% | 121.0   B/s |  54.0   B |  00m00s
[ 3/56] Installing perl-File-Copy-0:2.4 100% |   9.8 MiB/s |  20.2 KiB |  00m00s
[ 4/56] Installing perl-version-9:0.99. 100% |   2.8 MiB/s | 135.6 KiB |  00m00s
[ 5/56] Installing perl-File-Compare-0: 100% |   3.0 MiB/s |   6.1 KiB |  00m00s
[ 6/56] Installing perl-ExtUtils-ParseX 100% |  65.9 MiB/s | 405.1 KiB |  00m00s
[ 7/56] Installing perl-CPAN-Meta-Requi 100% |  27.2 MiB/s |  83.4 KiB |  00m00s
[ 8/56] Installing perl-ExtUtils-Comman 100% |   9.9 MiB/s |  10.2 KiB |  00m00s
[ 9/56] Installing perl-ExtUtils-Manife 100% |  42.2 MiB/s |  86.3 KiB |  00m00s
[10/56] Installing python3-pyparsing-0: 100% |  52.0 MiB/s |   1.0 MiB |  00m00s
[11/56] Installing systemtap-sdt-dtrace 100% |  88.0 MiB/s | 180.3 KiB |  00m00s
[12/56] Installing systemtap-sdt-devel- 100% |  59.9 MiB/s | 183.9 KiB |  00m00s
[13/56] Installing perl-ExtUtils-Consta 100% |  42.8 MiB/s |  87.6 KiB |  00m00s
[14/56] Installing perl-I18N-Langinfo-0 100% |  19.6 MiB/s |  40.2 KiB |  00m00s
[15/56] Installing perl-Math-Complex-0: 100% |  41.9 MiB/s |  85.8 KiB |  00m00s
[16/56] Installing perl-Math-BigInt-1:2 100% | 156.5 MiB/s | 961.8 KiB |  00m00s
[17/56] Installing perl-JSON-PP-1:4.16- 100% |  46.7 MiB/s | 143.6 KiB |  00m00s
[18/56] Installing qt6-srpm-macros-0:6. 100% | 714.8 KiB/s | 732.0   B |  00m00s
[19/56] Installing pyproject-srpm-macro 100% |   1.2 MiB/s |   2.5 KiB |  00m00s
[20/56] Installing efi-srpm-macros-0:5- 100% |  20.1 MiB/s |  41.2 KiB |  00m00s
[21/56] Installing add-determinism-0:0. 100% | 157.1 MiB/s |   2.4 MiB |  00m00s
[22/56] Installing build-reproducibilit 100% |   1.0 MiB/s |   1.0 KiB |  00m00s
[23/56] Installing perl-CPAN-Meta-YAML- 100% |  25.3 MiB/s |  51.8 KiB |  00m00s
[24/56] Installing annobin-docs-0:12.69 100% |  48.2 MiB/s |  98.8 KiB |  00m00s
[25/56] Installing annobin-plugin-gcc-0 100% | 107.1 MiB/s | 986.7 KiB |  00m00s
[26/56] Installing zig-srpm-macros-0:1- 100% | 166.4 KiB/s |   1.7 KiB |  00m00s
[27/56] Installing rust-srpm-macros-0:2 100% |   5.4 MiB/s |   5.6 KiB |  00m00s
[28/56] Installing qt5-srpm-macros-0:5. 100% | 757.8 KiB/s | 776.0   B |  00m00s
[29/56] Installing perl-srpm-macros-0:1 100% |   1.1 MiB/s |   1.1 KiB |  00m00s
[30/56] Installing package-notes-srpm-m 100% |   2.0 MiB/s |   2.0 KiB |  00m00s
[31/56] Installing openblas-srpm-macros 100% | 382.8 KiB/s | 392.0   B |  00m00s
[32/56] Installing ocaml-srpm-macros-0: 100% |   2.1 MiB/s |   2.2 KiB |  00m00s
[33/56] Installing lua-srpm-macros-0:1- 100% |   1.9 MiB/s |   1.9 KiB |  00m00s
[34/56] Installing kernel-srpm-macros-0 100% |   2.3 MiB/s |   2.3 KiB |  00m00s
[35/56] Installing gnat-srpm-macros-0:6 100% |   1.2 MiB/s |   1.3 KiB |  00m00s
[36/56] Installing ghc-srpm-macros-0:1. 100% |   1.0 MiB/s |   1.0 KiB |  00m00s
[37/56] Installing fpc-srpm-macros-0:1. 100% | 410.2 KiB/s | 420.0   B |  00m00s
[38/56] Installing dwz-0:0.15-8.fc41.x8 100% |  97.8 MiB/s | 300.3 KiB |  00m00s
[39/56] Installing ansible-srpm-macros- 100% |  35.4 MiB/s |  36.2 KiB |  00m00s
[40/56] Installing gcc-plugin-annobin-0 100% |  29.8 MiB/s |  61.1 KiB |  00m00s
[41/56] Installing python-srpm-macros-0 100% |  25.5 MiB/s |  52.2 KiB |  00m00s
[42/56] Installing fonts-srpm-macros-1: 100% |  27.8 MiB/s |  57.0 KiB |  00m00s
[43/56] Installing forge-srpm-macros-0: 100% |  19.7 MiB/s |  40.3 KiB |  00m00s
[44/56] Installing go-srpm-macros-0:3.6 100% |  20.2 MiB/s |  62.0 KiB |  00m00s
[45/56] Installing redhat-rpm-config-0: 100% |   8.4 MiB/s | 190.1 KiB |  00m00s
[46/56] Installing perl-Devel-PPPort-0: 100% | 145.6 MiB/s | 894.7 KiB |  00m00s
[47/56] Installing perl-AutoSplit-0:5.7 100% |  23.0 MiB/s |  23.5 KiB |  00m00s
[48/56] Installing perl-Benchmark-0:1.2 100% |  17.9 MiB/s |  36.7 KiB |  00m00s
[49/56] Installing perl-Test-Harness-1: 100% |  35.5 MiB/s | 582.4 KiB |  00m00s
[50/56] Installing perl-ExtUtils-Instal 100% |  42.6 MiB/s |  87.2 KiB |  00m00s
[51/56] Installing perl-ExtUtils-MakeMa 100% |  48.5 MiB/s | 744.8 KiB |  00m00s
[52/56] Installing perl-devel-4:5.40.1- 100% | 211.9 MiB/s |   8.1 MiB |  00m00s
[53/56] Installing perl-CPAN-Meta-0:2.1 100% |  42.8 MiB/s | 613.8 KiB |  00m00s
[54/56] Installing perl-Encode-Locale-0 100% |   9.8 MiB/s |  20.1 KiB |  00m00s
[55/56] Installing perl-doc-0:5.40.1-51 100% | 149.6 MiB/s |  11.1 MiB |  00m00s
[56/56] Installing perl-Time-HiRes-4:1. 100% | 146.5 KiB/s | 121.9 KiB |  00m01s
Complete!
[oct1158@fed41-bh8f7e0 luckfox-pico]$

 
一派掌門 二十級
4樓 發表于:2025-3-11 14:19

[oct1158@fed41-bh8f7e0 luckfox-pico]$ sudo dnf install perl-Thread-Queue
Updating and loading repositories:
Repositories loaded.
Package                  Arch    Version                  Repository        Size
Installing:
 perl-Thread-Queue       noarch  3.14-511.fc41            fedora        28.9 KiB
Installing dependencies:
 perl-threads            x86_64  1:2.40-511.fc41          fedora       115.1 KiB
 perl-threads-shared     x86_64  1.69-511.fc41            fedora        83.7 KiB

Transaction Summary:
 Installing:         3 packages

Total size of inbound packages is 124 KiB. Need to download 124 KiB.
After this operation, 228 KiB extra will be used (install 228 KiB, remove 0 B).
Is this ok [y/N]: y
[1/3] perl-Thread-Queue-0:3.14-511.fc41 100% |  87.7 KiB/s |  21.3 KiB |  00m00s
[2/3] perl-threads-shared-0:1.69-511.fc 100% | 142.4 KiB/s |  44.7 KiB |  00m00s
[3/3] perl-threads-1:2.40-511.fc41.x86_ 100% | 162.0 KiB/s |  58.0 KiB |  00m00s
--------------------------------------------------------------------------------
[3/3] Total                             100% | 104.8 KiB/s | 124.0 KiB |  00m01s
Running transaction
[1/5] Verify package files              100% |   1.5 KiB/s |   3.0   B |  00m00s
[2/5] Prepare transaction               100% |   7.0   B/s |   3.0   B |  00m00s
[3/5] Installing perl-threads-1:2.40-51 100% |  28.6 MiB/s | 117.2 KiB |  00m00s
[4/5] Installing perl-threads-shared-0: 100% |  28.0 MiB/s |  86.0 KiB |  00m00s
[5/5] Installing perl-Thread-Queue-0:3. 100% |  57.2 KiB/s |  30.4 KiB |  00m01s
Complete!
[oct1158@fed41-bh8f7e0 luckfox-pico]$

 
一派掌門 二十級
5樓 發表于:2025-3-11 14:20

[oct1158@fed41-bh8f7e0 luckfox-pico]$ sudo dnf install perl-FindBin
Updating and loading repositories:
Repositories loaded.
Package                  Arch    Version                  Repository        Size
Installing:
 perl-FindBin            noarch  1.54-514.fc41            updates        6.7 KiB

Transaction Summary:
 Installing:         1 package

Total size of inbound packages is 14 KiB. Need to download 14 KiB.
After this operation, 7 KiB extra will be used (install 7 KiB, remove 0 B).
Is this ok [y/N]: y
[1/1] perl-FindBin-0:1.54-514.fc41.noar 100% |  89.7 KiB/s |  14.1 KiB |  00m00s
--------------------------------------------------------------------------------
[1/1] Total                             100% |  15.1 KiB/s |  14.1 KiB |  00m01s
Running transaction
[1/3] Verify package files              100% |   1.0 KiB/s |   1.0   B |  00m00s
[2/3] Prepare transaction               100% |   3.0   B/s |   1.0   B |  00m00s
[3/3] Installing perl-FindBin-0:1.54-51 100% |  16.1 KiB/s |   7.1 KiB |  00m00s
Complete!
[oct1158@fed41-bh8f7e0 luckfox-pico]$

 

回復帖子

內容:
用戶名: 您目前是匿名發表
驗證碼:
(快捷鍵:Ctrl+Enter)
 

本帖信息

點擊數:27 回複數:4
評論數: ?
作者:巨大八爪鱼
最後回復:巨大八爪鱼
最後回復時間:2025-3-11 14:20
 
©2010-2025 Purasbar Ver2.0
除非另有聲明,本站採用創用CC姓名標示-相同方式分享 3.0 Unported許可協議進行許可。